otr tire shredEPTrubber powEPTmaking EPT
The EPT tire recycling EPT will be managed by the PLC, all the components will be method within of EPTs, there is Real ZERO Pollution. 1 labor, 1 engineer can run all the EPTs, no require to run the EPTs, just management the PLC. the EPTs can shield the EPTs, operate the EPTs and hold the EPTs work efficiently.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC computerized manage method, with computerized reversal management system in overload situation. Two-shaft tire crusher is EPTly developed for outdated tires with lower velocity and high torque to minimize sound and EPT consumption.
The blade of the shredEPTis created of substantial high quality metal and subjected to Bodycote heat therapy to achieve the best crushing efficiency.The shredEPTis simple to disassemble and change cutter blade and appropriate for tearing massive, extra thick and difficult resources.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire kind,output and last product. The grinEPTcan process OTR tires,huge truck tires,vehicle tires and so on at the pace of one-30tons whithin one hour.
| Product | Input size | Output dimensions | Cappacity | Motor | Blades amount | Dimensions | Fat |
| TS-800 | 800mm | 50*50mm | 1-2T/h | 2*22kw | 16pcs | 4*two.6*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | two*37kw | 20pcs | 4.eight*2.8*three.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | six-8T/h | 2*45kw | sixteen-30pcs | 5*2*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | two*55kw | twenty-24pcs | 5.6*two*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | 2*75kw | 20-30pcs | six*two.4*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | twenty-30T/h | two*110kw | 16-24pcs | seven.4*three.two*five.2m | 56T |
2.Rasper
EPT tire shredding system is developed to produce up to six tons for each hour of wire cost-free rubber mulch.This program produces up to a ninety nine% wire totally free chip ranging in dimensions among 12-25mm dependent on the preferred size.Following processing,the steel is taken out by our magnetic separation program.At this stage,the wire totally free rubber chips are all set to be colored and employed for landscaping mulch and the metal is ready to be baled and bought to smelters.
| Rasper | Motor | EPT | Potential | Dimensions | Bodyweight | Reducing chamber | Closing merchandise |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.four*1.2*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | one.seven*one.7*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | 700-1T/H | 2*two*four.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.one*two.1*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | 2*two.5*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*two.1*three.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Generating EPT is adopting bodily recycling approach and is designed to grind the rubber mulch from the rasper into small granules as wonderful as one-6mm. The granules are screened and re-circulated until finally the wanted size is attained. This Fully-Automated Tyre Recycling Line managing in regular temperature, no need to include any other chemicals, no pollution to the atmosphere. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | 300-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Proportions | 1.8*1.6*two.4m | one.8*1.nine*two.4m | two.2*two.3*3m |
| Last merchandise | one-6mm | 1-6mm | 1-6mm |
four.Miller
Rubber powEPTis the closing end result of ambient tire recycling.At this phase,crumb rubber is ground down into a clear powEPTform with virtually all metal and fiber removed.Rubber powEPThas numerous secondary employs from injection molding products,coatings,roofing materials and different asphaltapplications.
Rubber powEPTis usually located in forty-74 microns(.40-.74mm) in measurement.This micron dimensions metarial has the edge of currently being included into new or eXiHu (West Lake) Dis.sting formulations for different polymers and finished products.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter solution | Weighty responsibility truck tyres to bicycle tyres | |||
| Input dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to thirty-120 mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a manufacturing facility or a trading firm?
A. We are a producer with 30 a long time generation experience in tire recycling EPT. We have export license, we can supply you the manufacturing facility prices.
Q2. Can you ensure the ability as you described ?
A. Undoubtedly of course,other than that,we also supply three-5years warranty.
Q3, are you confident the closing rubber powEPTcan be completely cleanse out of wire steel or nylon ?
A. The ultimate powEPTpurity can attain ninety nine.nine%. we have magnetic separator which can independent the wire metal from the rubber powder.
