EPDM woven fabric waterproof membrane liner epdm membrane watertight
It can be pasted onto the cement surface immediately.
EPDM water-proof membrane is made from ethylene propylene diene monomer (EPDM), incorporating into some chemical auXiHu (West Lake) Dis.liaries, for case in point, carbon black, nanophase modifier, plasticizer, vulcanization accelerator and other individuals, it is one sort of polymer water-resistant membrane with superb overall performance elasticity.
| Thickness(mm): | one.2mm, one.5mm, two.0mm |
| Allowable deviation(%): | -10 to +fifteen |
| width(mm): | one thousand, 1200 |
| Size / roller: | 1200mm or Customized by the buyers’ requirments. |
Specification:
| No. | Items | JL1 | JL2 | |
| one | Tensile Energy (MPa) | 23 ordmC | ge7.five | ge4. |
| 60 ordmC | ge2.three | ge0.8 | ||
| two | Breaking EEPTation | 23 ordmC | ge450% | ge400% |
| -20 ordmC | ge200% | ge200% | ||
| three | Tear Energy kN/m | ge25 | ge18 | |
| four | EPTermeability, .3Mpa, 30 minutes | No leaking | No leaking | |
| five | Lower Temperature FleXiHu (West Lake) Dis.bility | -forty ordmC | -thirty ordmC | |
| 6 | Thermal Security (mm) | Prolong | le2 | le2 |
| Shrink | le4 | le4 | ||
| seven | Hot Air Ageing (eighty ordmC times168h) | Tensile Retention | ge80% | ge90% |
| Breaking EEPTation Retention | ge70% | ge70% | ||
| eight | Alkali Resistance, Saturated Ca(OH)two Remedy, 23 ordmC times168h | Tensile Retention | ge80% | ge80% |
| Breaking EEPTation Retention | ge80% | ge90% | ||
| 9 | Ozone Getting older(40 ordmC times168h) | EEPTation 40%, 500pphm | No crack | No crack |
| ten | Artificial Weathering Growing older | Tensile Retention | ge80% | ge80% |
| Breaking EEPTation Retention | ge70% | ge70% | ||
| 11 | Bonding Peel Energy (Sheet and Sheet) | N/mm (StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Check Circumstances) | ge1.five | ge1.five |
| Soaking Retention Fee(23 ordmC times168h) | ge70% | ge70% | ||
Characteristics
1) It can be utilized to the cement fundation directly.
2) Excellent climate fastness and dimensional balance.
3) Outstanding performance to substantial and reduced temperature (-40 ordmC ~ +80 ordmC), EPTresistant and anti-corrosion.
4) Increased tensile energy and better extensibility unEPTnormal design situations.
5) Easy set up, solid joint, and no environmental air pollution.
6) Great rooting penetration resistance.
Software:
one) Roofs, basement, toilet, bridge, underground, tunnel and dam.
two) EPT and civil developing watertight.
3) Geo-synthetic liner for swimming pool, channels, irrigation system
four) EEPTly for initiatives with large demands in sturdiness, anti-corrosion and deformation.
Development Method:
one). Make certain all area are cleanse,dry and dust-free of charge. Remove any free particles and any rust with a wire brush amp soft broom.
two).Roll out the membrane.
three).Remove the backing paper and location the adhesive facet to the previously prepared surface.
four).To ensure a tigEPT speak to-easy the EPT down with a dry cloth, remocing all the air bubbles
five).Push the EPT to the surface area firmly as soon as in placement.
6).Sleek flat all edages with a wallpaper roller or trowel.
seven).Soon after use reseal pack and keep uprigEPT in awesome,dry condition.
Storage and Transportation:
one) Water-resistant materials need to be stored unEPTdry and ventilated situations.
2) Different kinds of membranes must be piled separately.
three) UnEPTusual situation, storage period is one particular year because creation date.
four) Water-proof resources must be put vertically in the course of transportation.
five) It need to be stored absent from sunshine and rainwater.
six) Transportation and storage process need to be away from the fire source, storage temperature does not exceed 35 ordmC, the storage interval is 1 yr.
