*About EKO
FSEKO has been in the discipline of lamination film for above 10 a long time. The Lamnition Films are SGS examined with the acceptance of patent. And the top quality is controlled by the good quality method ISO 9001: 2008.
*Material
Surface area layer: BOPP
Glue layer: EVA adhesive
*Specification
Thickness: 35mic
Width: three hundred~1800mm
Size: two hundred~3000m
Paper core: 25.4mm (1 inch), 58mm(two.25inches), 76mm(3 inches)
Bonding: Significantly less than two
*approach parameter:
Products for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller stress: 10-20mpa
Velocity: eight-20 m/min
*instructions for utilizing BOPP thermal laminating film:
Regular procedure temperature is 90c-105c, roller pressure and temperature differ with diverse kinds of paper, ink and EPTs.
When using the film for the first time or do other therapy, try out a modest volume prior to mass laminating.
Make confident the ink is dry just before laminating. It will delaminate when the paper consists of also much moisture and powder.
Make confident put the substance in a reduced-temperature, dry place.
*EPT:
| SPECIFICATION | 35 micron GLOSS | 35 micronMATT | ||
| WEIGEPT | m sup2 /kg | thirty.sixty three | 31.sixty five | |
| kg/m sup2 | .03265 | . 0571 | ||
| Width | 300 – 1800 mm Upon customer’ s prerequisite |
|||
| Length | two hundred – 3, 000M(a lot more or much less ten% permitted) | |||
| CoronaTreatment Side | A single Aspect | Equally Side | ||
| Connector | Much less than 2 | |||
| Paper Core (inter Diameter) |
25mm(one inch) 58mm(2.twenty five inches) 76mm(3 inches) |
|||
